» Pneumatic turbine, ball and roller vibratorss

Pneumatic turbine, ball and roller vibrators

  • Turbine
  • noiseless
  • oil-free operation
  • low air consumption
  • ATEX II 2G c T6
  • Ball
  • quick start
  • oil-free operation
  • low price
  • Roller
  • large centrifugal force
  • no run-out

Turbine Vibrators VT

Compressed air driven turbine wheel to which they are embedded in an unbalanced mass. Specialty Turbine profile is the reason that the noise level is below 70 dB(A). Turbine vibrator belongs to the quietest pneumatic vibromotors. Works in all positions. Ball bearings are lubricated for life. The devices are powered by dry air.

Ball Vibrators VK

The ball vibrator was developed in order to reach high frequencies. The centrifugal force is generated by a circulating ball running on a polished path made of ball bearing steel. The ball vibrator works in all positions. (Fast start, Oil-free operation, Favourable price)

type
 
frequency
[l/min]
centrifugal force
[N]
air consumption
[l/min]
weight
[kg]
VT 7 16500 715 85 0,31
VT 9 15500 950 105 0,31
VT 13 11000 1310 180 0,75
VT 16 9000 1650 225 0,77
VT 17 8500 1960 235 0,78
VT 24 8000 2470 325 2,00
VT 31 7500 3130 350 2,10
VT 50 5000 5080 550 4,20
VK 10 30000 520 175 0,31
VK 14 25000 960 200 0,31
VK 16 20000 1260 225 0,73
VK 22 15500 2160 275 0,75
VK 26 14200 4370 380 1,92
VK 30 13000 5250 500 1,96
VR 17 40000 1690 200 0,36
VR 29 38000 2910 250 0,41
VR 47 29000 4740 325 0,85
VR 78 26000 7850 550 0,90
VR 97 18000 9730 850 2,48

Data measured at 6 bar.

type A [mm] B [mm] C [mm] D [mm] E [mm] F G K [mm]
VT 7-9 55 36 90 68/73 7 1/8" 1/8" 12
VK 8-14
VR 17-29
VT 13-17 80 49 128 104 9 1/4" 1/4" 16
VK 16-22
VR 47-78
VT 24-31 110 63 170 130/140 11 3/8" 3/8" 21
VK 26-30
VR 97
VT 50 140 74 200 170 11 3/8" 1/2" 25
VK 40

Technical data changes reserved.